Finished 3D salted butter paper squishy next to the printed template sheets.
a little salt, a lot of squish
  • Medium
  • 30–45 minutes
  • 3D shape
  • about 2.3 × 1.2 in (5.8 × 3.0 cm)

This kawaii salted butter block features a cheerful mascot, shiny salt crystal illustrations, and a cute “Squish Facts” label on the back. Grab our free **butter squishy template** to craft your own 2.3 × 1.2 in (5.8 × 3.0 cm) rectangular wrapper. The PDF comes in US Letter and A4 with 3 versions: full color, a coloring page, and a blank design. Pair it with our toast paper squishy or strawberry butter squishy for a sweet breakfast set!

What you need

How to make it, step by step

  1. Step 1: Print the template

    1Print the template

    Print your chosen salted butter page at 100% on plain printer paper (make sure to turn off “fit to page”). Check the scale bar at the top right: it should measure exactly 2 inches (50 mm on A4). Picked the coloring page? Color the butter top a creamy yellow and shade the blue waves and salt crystals now before adding any tape.

  2. Step 2: Tape the motif

    2Tape the motif

    Cover the entire printed butter wrapper with wide clear packing tape, making sure to include all the yellow and blue tabs. Lay each strip down across the long row of side panels and smooth it outward from the center without stretching it. This glossy layer gives the salted butter block its classic shiny wrapper look and makes the paper strong enough to squeeze.

  3. Step 3: Cut it out

    3Cut it out

    Cut carefully along the solid black outer line with your scissors, keeping every glue tab and tape tab attached. Take your time around the angled corners of the tabs so they stay neat and wide. Do not cut any of the interior dashed lines—those are the fold lines that shape the rectangular butter block.

  4. Step 4: Pre-fold every tab

    4Pre-fold every tab

    Use your ruler and an empty pen to score firmly along every dashed line, both around the long wrapper panels and on every tab. Fold each line and tab inward toward the blank white back once, then open it again. Pre-folding now is super important because taped paper is stiff and tricky to bend once the box is partly built.

  5. Step 5: Make the walls

    5Make the walls

    Fold the side panels—the front logo, the “Squish Facts” back, and the two short ends—into a rectangular ring with the artwork facing out. Put a dab of glue on the yellow side tab and press it inside the opposite edge to hold the ring together, then run a strip of clear tape along the outside of that seam from top to bottom.

  6. Step 6: Close the bottom

    6Close the bottom

    Swipe glue onto the three yellow tabs surrounding the blue-and-yellow patterned bottom panel. Fold the bottom flap in and reach inside the open box to press those glued tabs firmly against the inner walls so the base sits flat. Leave the top panel with the sparkly yellow butter surface and blue tabs completely open for stuffing.

  7. Step 7: Tape the bottom

    7Tape the bottom

    Because craft glue will not hold on slick packing tape for long, you need to reinforce the base right away. Lay strips of regular clear tape along every bottom edge from the outside, covering the full length of both long sides and both short ends so no stuffing can push the corners open later.

  8. Step 8: Stuff it

    8Stuff it

    Push small, loose scrunches of plastic grocery bag or fluffy bits of fiberfill in through the open top of the wrapper. Tuck a little into the corners first, then fill the middle lightly. Keep the stuffing airy so the salted butter block stays crisp and square instead of bulging out like a round pillow.

  9. Step 9: Close it

    9Close it

    Fold the three blue tabs along the yellow butter top inward and close the lid over the stuffing like a real butter box. Hold the lid snug against the walls and tape every top edge from the outside with regular clear tape, running the tape all the way along the edge from corner to corner.

  10. Step 10: Squish!

    10Squish!

    Your salted butter squishy is ready! Give the rectangular block a gentle squeeze and watch the glossy wrapper puff right back into shape. If you want a slow-rising squishy when you press it, prick one tiny pinhole along a taped corner so air can escape and refill smoothly.

Printable salted butter paper squishy template with cut, fold, glue, and tape tabs.

Free Salted Butter Squishy Template

  • Color
  • Coloring page
  • Blank, design your own
  • Step-by-step guide

One free PDF: the template in three versions (pages 1–3) and the step-by-step guide (pages 4–6). Print the template at 100% on plain printer paper.

Tips for the perfect squish

  • Keep the butter edges crisp. A butter block looks best with sharp, boxy corners rather than rounded sides. Score every dashed line firmly with an empty pen and a ruler before you fold so the taped paper creases cleanly.
  • Stop long seams from popping. The long horizontal edges on the yellow top and patterned bottom take the most pressure when you squeeze. Since glue does not hold on tape, put a new strip of clear tape along the whole seam.
  • Fix a bulging butter block. If the front mascot and “Squish Facts” panel bow outward, there is too much stuffing inside. Take some filling out so the rectangular wrapper walls stay flat.
  • Smooth tape over the wrapper. The wide layout spans across the long row of panels, which can make long tape strips wrinkle. Use shorter strips of packing tape and lay them on gently without pulling.

Questions

How do you make a butter squishy out of paper?

Print our template on plain paper, cover the motif with clear packing tape, and cut along the solid outer line. Score and fold the dashed lines into a rectangular box, glue the yellow tabs inside to hold them, tape every seam from the outside, and stuff it lightly before taping the top shut.

Can I build this paper butter squishy with only glue?

No, glue just holds the yellow tabs in place while you build the walls and bottom. It does not stick to tape-covered paper for long, so every glued seam gets a strip of clear tape from the outside.

What paper works best for a printable butter paper squishy template?

Plain printer paper (80–100 gsm / 20–24 lb) gives you the best squish. Cardstock is hard to fold once it is taped and makes the small butter block too stiff.

What can I stuff the butter wrapper with?

You can use plastic grocery bags for a crinkly, light feel or fiberfill for a soft bounce. Stuff the wrapper lightly so the rectangular shape stays neat and flat.

Can I make these with a class or a group?

Yes! Print one sheet per person and cut tape strips in advance before you start. Kids can color the coloring page while you help with scoring and taping—plan about 45 minutes.

More paper squishies to make

Butter Squishy Template: Free Printable 3D Salted Butter Paper Craft
psst… save it for later!

Pin this tutorial

Save it to your craft board so you can find the free template again.

Save to Pinterest